What does a door, gate, window or fence configurator cost? Scope and procurement
What drives the effort of a door, gate, window or fence configurator, which tier fits, what Modelwright charges and what to settle before quotes.
Short answer: the cost of a configurator for doors, gates, windows or fencing depends less on the number of colours than on three things: how many ranges with their own size tables you include, how many checks run against the installation situation, and what the enquiry must contain. At Modelwright a 3D product view starts at EUR 1,990, a configurator with rules and an enquiry at EUR 5,400 plus EUR 199 a month, and the Complete package at EUR 8,880 plus EUR 249 a month (all excluding VAT). The binding fixed price follows scoping.
This guide is for managing directors, heads of sales and procurement leads at door, gate, window and fencing manufacturers who need to budget and compare offers.
Which tier do you need: a view, a configurator or a planner?
Start with what should happen on your website, not with the budget. In this product group there are three typical answers.
| Goal | Tier | Typical case |
|---|---|---|
| Show and explain the product: opening types, profile, finishes | 3D product view | A window range with its opening types and a profile section |
| Let buyers choose variants, rule out invalid combinations, send a complete enquiry | Configurator | A front door range with finishes, handles and opening direction |
| Check against the building or site, count quantities, show a section or site plan | Planner with checks | A sectional door with headroom and side-room checks; a fence line with gate run-back and quantities |
The right-hand column is our own assessment based on our example configurators, not a fixed rule. The window and door configurator shows five opening types, material, colours and a profile section but no enquiry, roughly an extended product view. The pivot front door configurator adds options, example rules and a PDF enquiry. The sectional and roller door configurator and the fence and gate configurator check against a building or a site, which puts them in the third tier. All four are fictional products with example values.
What drives the effort for doors, gates, windows and fences?
The general cost factors of any 3D configurator are covered in how much a custom 3D product configurator costs. This product group adds five drivers of its own:
- Ranges with their own tables. Each range with its own size grid, hardware or clearances is a separate set of data and rules. Two door ranges sharing one table add little; two with different mechanisms add a lot.
- Types of movement. Each opening mechanism needs its own animation to scale: panels round a track curve, slats onto a barrel, tilt and turn, a sliding leaf, a pivot. The door example has three door types, with four track types for the sectional door.
- Checks against the installation. Headroom and side room, run-back and slope, swing area: each check needs rules, a visual in the model and a line of text in the review. A one-click fix is extra logic on top.
- Setting. A door makes sense in a hall or garage, a fence on a site. A simple setting is often enough; vehicles for a passage check or obstacles on the site are further parts to build.
- Enquiry and quantities. A PDF with view and section, a position list for several windows, or counted panels and posts for a fence are requirements of their own. We recounted the fence example's default L-shaped layout by hand: 44.6 m of fence, 19 panels and 24 posts, matching the demo.
What rarely drives the effort: further colours from an existing palette, further sizes within an existing table, or a second language for texts that already appear in the review.
What does Modelwright charge?
| Package | Price (excl. VAT) | Scope |
|---|---|---|
| Package A, 3D product view | from EUR 1,990 one-time | A 3D view of one product family with up to two models, embedded in your website. Hosting by us optional: EUR 19 a month. |
| Pilot | EUR 2,900 one-time | A configurator for one product family from your data in six weeks. Credited in full if you order the configurator within 60 days. |
| Configurator | from EUR 5,400 one-time + EUR 199 a month | Your options and rules for one product family; a summary and an enquiry carrying the full configuration, by email or webhook. |
| Complete | from EUR 8,880 one-time + EUR 249 a month | The full scope for your range, for example checks, a parts list, an example price or explainer views. |
For Configurator and Complete, the monthly fee is part of the offer: it covers hosting, care and small changes, with a 12-month minimum term. All prices are in EUR, excluding VAT; exact scope and the fixed price follow scoping. As a rough guide: a window range to show starts with Package A, a door or gate range with rules and an enquiry with the Configurator, and a door or fence planner that checks against the building or site is more likely a Complete project.
Template software or a custom build?
There are vendors that specialise in this market. SaleSqueze lists a series of fence configurators by product type on its fence page and publishes no price there [1]; Threekit promotes door and window quoting for reps and dealers, also without a published price [2]. These are the vendors' own statements. A template is quicker when your product fits it. A custom build is worth pricing when your mechanism, your size tables or your checks are your own, or when the configurator has to run inside your website in your design.
Procurement checklist
Settle these questions before the first quote, whichever vendor you ask:
- Which single range goes in first? Ideally the one that sells most or causes the most questions.
- Are size tables and clearances per build available as a table, or only inside installation manuals?
- Which three checks would prevent most wasted surveys or follow-up calls today?
- Who receives the enquiry: sales office, dealer or installer? See from enquiry to site survey and dealer.
- Should a price appear, and if so, as a guide or as binding?
- Who maintains tables and rules after launch, and how often do they change?
- What happens to your data and models when the contract ends?
With these answers, offers become comparable. Without them, you compare prices for different work.
What to send for a fixed-price quote
You do not need complete engineering data for a sound estimate. Usually enough:
- the size table of the first range, with minimum and maximum sizes and the clearances per build;
- photos, brochure pages or drawings of the visible parts and finishes;
- your rules in plain language, such as "wicket door only above a certain width" or "raked installation only up to a certain slope";
- one example of a good enquiry and one that led to a string of follow-up questions.
We treat your documents as confidential; your product appears nowhere in public without your explicit approval.
When a pilot makes sense
If you are unsure whether homeowners, contractors, dealers and your own sales team will actually use a configurator, the pilot is the smaller step: one product family with your data, six weeks, then a joint review. If you order the configurator within 60 days, the EUR 2,900 is credited in full. We do not promise figures; whether a configurator pays off depends on your range and sales route.
Examples to try
Example configurator · fictional product
Sectional & roller door configurator
Plan an industrial or garage door: enter headroom and side room and see in the building section at once whether tracks, barrel or head box fit.
Example configurator · fictional product
Fence & gate configurator
Plan fencing and a gate for a commercial or industrial site: draw the fence line, pick the gate and see on the ground whether the sliding gate's run-back is clear.
Example configurator · fictional product
Pivot front door configurator
Plan a pivot front door: structural opening with side and top panels, four door faces, pivot side and direction with a walk-through estimate, finishes and hardware – with a PDF enquiry.
Example configurator · fictional product
Window and door configurator
A window and door system: fixed, tilt-and-turn, double sash or lift-and-slide door, width and height, material, colour and glazing bars – with opening and a profile section.
For how we build a configurator for your own range, see custom 3D configurator development.
Sources
- SaleSqueze, fence 3D configurator page, read 14 November 2026: salesqueze.com
- Threekit, "Door and Window Quoting for Reps and Dealers", read 14 November 2026: threekit.com


