Building a configurator for doors, gates, windows and fencing: the technical decisions
Size tables instead of stock models, opening paths, section views, phones, privacy and upkeep: build decisions for a door, gate or window configurator.
Short answer: build the 3D model from your size tables and rules, not from a library of finished models. Every permitted width, height and build option is then generated on the fly, and the picture can never disagree with the fit check. The real decisions are about movement (how does the product open?), cut-away views (what should the buyer see inside?), phones, and who keeps the tables up to date after launch.
This guide is for product managers, technical marketing and digital teams at manufacturers of doors, gates, windows and fencing who are scoping a 3D configurator.
Why generate the model from size tables?
A window range comes in hundreds of widths and heights, a sectional door in many sizes, a fence in any length. Keeping a separate model for each combination is neither possible nor necessary. Instead the product is assembled from parts whose position and length follow from the buyer's inputs: panel height and count for a door, frame and sash dimensions for a window, panel width, post spacing and cut panels for a fence.
That is how our example configurators in this group work. In the sectional and roller door configurator and the fence and gate configurator, all geometry is generated in code: door panels, tracks and barrel, mesh panels, posts and the counterbalance tail, plus the surface textures. The window and door configurator also rebuilds frame and sashes from parameters as width and height change. All three are fictional products with example values; no manufacturer's model was used.
The practical benefit: when model and checks read the same table, a change to a size step or a clearance changes both at once. With separate stock models, someone has to update each affected file by hand, and that is where the discrepancies appear that a surveyor later finds on site.
What we need from you
- Size tables: available widths and heights per range, space needed per track or hardware type, panel sizes and height lists.
- Drawings or CAD of the visible parts: profile sections, panels, fittings, posts. We use CAD when it is suitable for the web and check that before we start; see turning CAD files into a web configurator.
- Rules in plain language: what combines with what, minimum and maximum sizes, when a check turns red.
Fixed parts that never change size, such as handles, operators or hinges, can be delivered as finished models in glTF, the Khronos Group's royalty-free format for transmitting and loading 3D models [1]. Anything that grows with the opening is more robust when built in the browser from parameters.
How accurate does the opening animation need to be?
For these products, movement is part of the buying decision. Whether a door clears the ceiling, a sliding gate has enough run-back or a front door swings into a hallway only becomes clear when the product moves. The animation therefore has to follow the real path, not just look smooth.
| Example | Movement in the demo | What it shows the buyer |
|---|---|---|
| Sectional, roller and high-speed doors | Panels follow the curve of the track, slats wind onto the barrel, the fabric curtain rolls up | Space needed under the ceiling and the clear passage |
| Fence and gate | The cantilever leaf runs over its carriages and stops at an obstacle; swing leaves turn inwards | Run-back and swing area on the site |
| Window and lift-and-slide door | Closed, tilted, open; the lift-and-slide door slides aside | Opening type and sash position |
| Pivot front door | Pivot side and opening direction with the swing area | Space in front of and behind the door, walk-through estimate |
We measured this on the door demo: across 11 fitting configurations, sampled at 21 points along each opening path, the leaf never passed through the ceiling. The lesson for your project is that the path of the movement must use the same dimensions as the fit check; otherwise animation and check will contradict each other.
Building section or profile section?
A cut-away shows what you cannot see from outside. Our examples use two kinds:
- A building section on the door demo: ceiling, tracks, shaft and springs or barrel, with the clash zone in red. The cut goes through the building, not through the door hardware, and the head detail is small at full door height, so users zoom in.
- A profile section on the window demo: chambers, gaskets and glazing build-up, labelled on screen as "illustrative, not a real system".
Decide whether your section should sell or explain. A profile section with real values needs verified data from you; performance figures belong in a configurator only if you stand behind them for exactly that build.
Phones and loading
Homeowners, contractors and fitters also open configurators on phones. Our newer demos are built for that. The door and fence demos passed a scripted journey on seven screen sizes, from a 360-pixel phone to desktop, including touch rotate and zoom. These were emulated browser tests, not tests on physical devices. Once idle, both demos stop drawing frames (0 frames in 2.5 seconds), which saves battery.
The window demo comes from an older generation of our demos; its control bar is not yet optimised for phones, and an update is prepared but not published. In a project, phone use is a requirement from day one. The 3D view only starts when the visitor opens it; until then a poster image shows.
Privacy and accessibility
A configurator that collects measurements and contact details processes personal data as soon as it sends them. In the door and fence demos nothing typed is sent or stored; the enquiry text and PDF are created in the browser, and the demos make no requests to third-party servers while running. We only count which controls are used. In a project you decide where enquiries go and who stores them.
For accessibility, controls should work with a keyboard, and everything the 3D view shows should also exist as text, for example in the review step and the enquiry text. The W3C's Web Content Accessibility Guidelines (WCAG) 2.2 set out general requirements for web content [2]; which obligations apply to your site is a question for your legal advisers.
Who maintains tables and rules after launch?
In this product group, what changes most are tables: a new size, another colour, a different operator, a revised clearance. In the door and fence demos these values sit in a data table separate from the code; in the door demo, for instance, the headroom needed per track type and application. That separation keeps changes small and testable.
A self-service rules editor is not part of our standard offer; we make changes to products, rules and colours as part of ongoing care. One detail worth knowing: in the door demo, labels in the 3D view are HTML overlays, so they do not appear in the images inside the PDF; dimensions and values are listed there as text instead.
The four examples
Example configurator · fictional product
Sectional & roller door configurator
Plan an industrial or garage door: enter headroom and side room and see in the building section at once whether tracks, barrel or head box fit.
Example configurator · fictional product
Fence & gate configurator
Plan fencing and a gate for a commercial or industrial site: draw the fence line, pick the gate and see on the ground whether the sliding gate's run-back is clear.
Example configurator · fictional product
Window and door configurator
A window and door system: fixed, tilt-and-turn, double sash or lift-and-slide door, width and height, material, colour and glazing bars – with opening and a profile section.
Example configurator · fictional product
Pivot front door configurator
Plan a pivot front door: structural opening with side and top panels, four door faces, pivot side and direction with a walk-through estimate, finishes and hardware – with a PDF enquiry.
The pivot front door configurator covers the structural opening, pivot point and swing. How the door fit check works in detail is explained in headroom, side room and track type. For how we work on your product, see custom 3D configurator development.
Sources
- Khronos Group, glTF, read 14 November 2026: khronos.org/gltf
- W3C, Web Content Accessibility Guidelines (WCAG) 2.2, read 14 November 2026: w3.org/TR/WCAG22


