Technology

Hot tub configurator rules: models, accessories and price lines

Rules for a wood-fired hot tub configurator: stove type and size, colours and covers per model, accessory groups, price lines and patio fit.

Short answer: a hot tub configurator needs three groups of rules: model (which sizes, interior colours and covers each stove type offers), accessories (which parts suit which model) and price (a base price per size, surcharges per option, and what is included at no extra cost). A simple patio fit check comes on top. The hard part is not the 3D model; it is making sure the price, the model and the enquiry always show the same configuration.

Wood-fired hot tub configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

What are the parameters of a wood-fired hot tub?

In the example configurator the inputs are:

ParameterIn the exampleDependency (proposed)
ModelStove inside, stove outsideSets sizes, interior colours, covers and accessories
SizeSizes per modelBase price and footprint
Interior colourA choiceOwn choice per model, possibly with a surcharge
CoverA choiceIncluded or a surcharge, per model
LightingOptionsSurcharge per option
AccessoriesStep, side table, flue parts, filtration, frost protectorIn groups; some parts for one model only
PatioPatio sizeBasis of the fit check

All values and prices are fictional example values. The first two columns follow the list on the library page; the dependency column is a proposal for how a manufacturer can write down its rules, not a description of the demo's logic.

Why the model comes first

For the configurator, stove inside and stove outside are two products with a shared interface. We propose making the stove type the first choice and hanging everything else from it:

  • A size list per model. Each stove type has its own sizes. On a switch, the size jumps to a default you set.
  • Colours and covers per model. If an interior colour exists for one stove type only, it disappears for the other. If it was selected, the configurator replaces it with one that is available and says so.
  • What is included, per model. The standard equipment is listed under the model. A cover that is included with one stove type may cost extra with the other; the configurator then shows "included" instead of a price.

How should accessories be handled?

The library page lists a step, a side table, flue parts, filtration and a frost protector. For a maker's configurator we recommend putting accessories into groups, for example timber items, flue and water. That keeps the choice tidy and lets you write rules per group. Two examples of such rules:

  • For one model only. A part that only suits the stove-outside type appears only there. If the buyer switches model, it is removed with a message.
  • Visible on the model. Every accessory you can see appears in the 3D model; parts such as filtration or frost protection appear in the list and in the enquiry.

Which flue parts are needed or permitted for a given site is not decided by the configurator. That is for the manufacturer and the installer to settle and stand behind; the configurator only shows what you offer.

How should the price lines be built?

According to its library page, the demo shows a sample price total. For your configurator we propose a price structure your sales team can recalculate at any time:

LineRuleWorked example
Base pricePer model and size4,200
Interior colour0 or a surcharge+ 0
Cover"Included" or a surcharge per model+ 400
LightingSurcharge per option+ 250
AccessoriesSum of the parts chosen+ 350
TotalThe sum, labelled "indicative" or "incl. VAT" as you specify5,200

These figures are our own worked example, not values from the demo and not market prices. The rule behind them is what matters: each line in the total matches a line in the enquiry, in the same order. Where a configurator with prices ends and CPQ software that produces quotes begins is covered in 3D configurators for manufacturers.

How does the patio fit check work?

According to the library page, the demo includes a patio fit check with an outline, as a fictional sample value. A sensible version: the buyer enters the length and width of the patio, and the configurator compares them with the footprint of the tub, including the chosen step and, for the stove-outside type, the side stove. If it does not fit, it can suggest a smaller size. Clearances to walls and planting, the load-bearing capacity of the base and any stove questions are not answered by this; they stay with the manufacturer and the buyer.

What does the heat-up animation do?

The demo has a light-the-stove animation. According to the library page it is there to make the warmth and evening mood tangible, which is what a hot tub is bought for. Any values in it are sample values for a fictional product. If you want to show heating times or temperatures in your configurator, they should be your own tested figures, clearly labelled as such.

What data do you supply?

We need your models and sizes with dimensioned drawings, interior colours and covers per model, the accessory list with its assignments, your price list and what is included, and your wording on stoves and siting. How drawings and CAD become the web model is covered in CAD to web 3D configurators.

What comes out at the end

The enquiry should name model, size, interior colour, cover, lighting and accessories with their price lines and the total, plus the patio size. In the demo the enquiry text can be copied and downloaded as a PDF. In a project it goes to your sales team by email or webhook; handing it to a shop basket is checked per shop system.

Example configurator · fictional product

Wood-fired hot tub configurator

Put together a wood-fired hot tub: stove inside or outside, size, interior colour, cover, lighting and accessories – with a heat-up animation, patio fit check, sample price and PDF enquiry.

Saunas & hot tubs · Dimensions and sizes · Colours · Options, modules and accessories

You can try this in the wood-fired hot tub configurator. Who such a configurator suits is covered in wood-fired hot tub configurator software. For hiring us, see custom 3D configurator development.

Frequently asked questions

What happens when our prices change?

Prices sit in a data file or table, separate from the 3D model. A price change is a data change, not a rebuild.

Can it handle several currencies?

Yes, if you have a price list per market. Language, currency and tax wording are set up per project.

Can we offer accessory bundles?

Yes. A bundle is its own option with its own price, showing several parts in the model and the enquiry.

Sources

  1. Modelwright library: wood-fired hot tub configurator, "Live in this demo" list (read 14 November 2026): /en/library/wood-fired-hot-tub-configurator/

Read next