Industries & use cases

Lighting and acoustics configurators: from configuration to enquiry

How a luminaire or acoustic-panel configurator feeds specifiers, wholesalers and sales: what an enquiry should carry and what is built vs proposed.

Short answer: luminaires and acoustic elements are rarely bought by the person who clicks through a configurator. They are specified by lighting designers, acoustic consultants and architects, then priced by an electrical wholesaler or a fit-out contractor. A configurator for these products earns its place when its output travels well along that chain: an article number the wholesaler can look up, a parts list the project team can check, and an enquiry that tells your sales team which room, which quantity and which open questions they are dealing with.

This guide is for heads of sales, sales operations and e-commerce leads at manufacturers of linear luminaires, lighting systems, acoustic baffles, ceiling rafts and wall panels. It covers the sales path, not the product logic: for that, see the guide on linear lighting configurator rules and its counterpart for acoustic baffles.

Acoustic baffle & panel configurator – preview of the example configurator
Example configurator · fictional product · example values. Loads only when you click. Open the demo page →

Who actually uses a lighting or acoustics configurator?

In most projects several people touch the same product decision, each with a different question:

  • Lighting designers and acoustic consultants want to know whether your system fits their concept: lengths, layouts, optics, element sizes, colours, mounting heights. They do the formal design in their own tools and against the relevant standards.
  • Architects and interior designers care about appearance and fit: how a run of light or a field of baffles looks in the room, and what clear height remains below.
  • Electrical wholesalers and fit-out contractors need article numbers, quantities and parts they can price and order without guessing.
  • Building owners and facility managers (an office tenant, a school authority, a restaurant owner) mostly want to see the result and approve it.
  • Your own sales and project team need a complete, unambiguous request so they can quote or advise without a clarifying call.

A configurator that only serves one of these groups tends to produce enquiries that the next group has to redo. The design question is therefore: what does each person take away, and in what format?

What do the two example configurators hand over today?

Both of our examples for this group are example configurators with a fictional product and example values, built by Modelwright with its own geometry. No manufacturer ordered, reviewed or endorsed them. Their outputs differ on purpose, because they show two different hand-over styles.

OutputLUMA LINE linear luminaireAcoustic baffle and panel configurator
Machine-readable resultA generated article number that can be copied, and a parts list downloadable as CSVA summary with every chosen value
Checks travelling with the resultShown on screen next to the article numberA review page with the checks and the calculation table
EnquiryNo enquiry form and no PDF in this demoEnquiry text to copy and a PDF with a room view, a top view, the summary, the checks, the calculation and the contact details
Contact fieldsNoneName, company, email, phone, number of rooms, notes
What is sentNo enquiry is sentNothing: inputs are not sent or stored; text and PDF are created in the browser

You can try both: the LUMA LINE lighting configurator and the acoustic baffle and panel configurator. In the baffle demo, usage statistics record the names of the controls used, never what a visitor types [1].

The LUMA LINE example leans towards the wholesaler and the project team: an article number and a parts list are the language of ordering. The baffle example leans towards the specifier and the sales team: a room view, a top view and a written summary are the language of a consultation. Many manufacturers need both, and a project build can combine them.

What should an enquiry from a lighting or acoustics configurator contain?

A useful enquiry lets your team answer without phoning back. For these product groups that usually means:

  • The room: type, length, width and height, and the mounting or hanging height chosen.
  • The configuration: layout or pattern, lengths or element sizes, optic or material, colour temperature or colour sequence, finish.
  • Quantities: total run length or number of elements and area, number of rooms.
  • Identifiers: the article number or a configuration code that your team can reopen.
  • The checks and their result, including any warning the visitor accepted (for example a clear height below an example rule).
  • The role of the sender: designer, contractor, wholesaler or building owner. It changes who should answer and how.
  • Open questions: on-site conditions such as sprinklers, ventilation or existing lights, which the configurator cannot know.

Every value in the enquiry should carry its status. Example estimates such as a lux reading or a reverberation figure belong in the enquiry only with their label: they support the conversation and do not replace a lighting design or an acoustic design. For indoor workplaces the lighting requirements are set out in DIN EN 12464-1 [2]; for the acoustic quality of rooms in Germany, DIN 18041 is the planning standard [3]. Whether a project meets them is decided by the planner on the basis of your product data, and the manufacturer is responsible for the data it publishes.

What is standard, and what would be built per project?

Here is where we draw the line, so that nobody buys a feature that only exists in a slide.

Standard in a Modelwright configurator

  • The configuration, a summary and an enquiry carrying the full configuration, delivered by email or webhook to your sales team [4].
  • Your rules, languages and analytics events set up per project; private review links before launch [4].
  • Embedding as its own page or by snippet in any website or shop [4].

Checked case by case

  • Hand-over into a CRM, an ERP connection and AR are assessed per project; they are not standard [4].

Proposed capabilities (not in either demo)

  • Routing to a wholesaler or regional partner by postcode, country or sender role. None of our demos routes enquiries; this would be built to your partner structure.
  • Article number into a shop cart, for manufacturers that sell standard lengths or sets online. The LUMA LINE demo stops at copying the number.
  • Tender text from the configuration: a written specification paragraph that a designer can paste into a bill of quantities. This needs your approved wording and is bespoke.
  • Downloads for planning software, such as a link to the product data your planners already use. For luminaires, the open GLDF format bundles product variants, photometry and geometry in one file [5]; the configurator would point to your files, not create them.

Not standard

Price quotes as PDF documents and CPQ, ERP integration and a self-service editor for your team are not part of our standard offer [4]. An enquiry PDF that repeats the configuration, as in the baffle demo, is something different from a binding quote.

Which hand-over suits your sales channel?

Your channelWhat the configurator should produceTypical first step
Through wholesalersArticle number, parts list, quantitiesArticle number logic and CSV, as in the LUMA LINE example
Specification-led projectsRoom view, summary, checks, labelled estimatesEnquiry with PDF, as in the baffle example
Direct to fit-out contractorsBoth, plus number of rooms and site notesEnquiry by email or webhook, routing later
Online shop for standard itemsValid variant into the cartAssessed per shop system

Start with the channel that brings you the most incomplete requests today. That is where a configurator saves the most back-and-forth, and it gives you a clear test: do enquiries arrive complete enough to quote? We make no promise about the number of enquiries; what we can design for is their quality.

Why a configurator makes sense for these products at all is covered in lighting configurators for manufacturers and acoustic panel configurators for manufacturers. The technical side (data, light and acoustic estimates, mobile, privacy) is in implementing a lighting or acoustics configurator, and scope and prices are in what a 3D configurator costs. For the service itself, see custom 3D configurator development.

Checklist before you scope the enquiry flow

  • Who receives enquiries today, and in what format do they arrive?
  • Do your wholesalers and partners work with article numbers, and is that logic written down?
  • Which values are estimates that must carry a label?
  • Which roles (designer, contractor, building owner) should be asked for, and does the answer change who replies?
  • Should enquiries go by email, by webhook into an existing system, or both?
  • Which documents should a planner be able to download alongside the configuration?

Sources

  1. Demo features: the "Live in this demo" lists on the linked library pages and the demo source files (read 14 November 2026)
  2. DIN Media: DIN EN 12464-1:2021-11, Light and lighting – Lighting of work places – Part 1: Indoor work places, read 14 November 2026: dinmedia.de
  3. DIN Media: DIN 18041:2016-03, Acoustic quality in rooms, read 14 November 2026: dinmedia.de
  4. Modelwright: services and 3D configurator pages (read 14 November 2026)
  5. GLDF – Global Lighting Data Format, read 14 November 2026: gldf.io

Read next